Macam-macam code rahasia handphone adalah code-code yang biasa dipergunakan untuk mereparasi perangkat handphone atau dalam perbaikan ponsel hanya dengan menekan tombol keypad yang ada pada handphone yang telah mengalami kerusakan, kerusakan-kerusakan ini bisa tergolong ringan maupun berat, dalam teknik perbaikan ini tidak memerlukan perangkat lain atau alat bantu yang biasa digunakan untuk mereparasi pada handphone yang rusak, sedang kerusakan-kerusakan ini seperti : Hang, System Error, Aplikasi Error, Phone Lock, Searching, Dll
TIPE HP yang Beredar Di Indonesia
ERICSSON
Langkah Pertama, anda hidupkan Handphone.
Untuk mengetahui number IMEI yaitu ketik : *#06#
Restore English menu version : *#0000# atau < 0 0 0 0 >
Version of software : > * < < * < *
Simlock info : < * * <
SAMSUNG
IMEI number : * # 0 6 #
Software version : * # 9 9 9 9 # or * # 0 8 3 7 #
Net Monitor : * # 0 3 2 4 #
Memory reset (removes SIMLOCK!!!) : *2767*3855# (works only on older versions)
Memory reset CUSTOM : *2767*2878# (works only on older versions)
Change dispplay contrast : * # 0 5 2 3 #
Memory info : * # 0 3 7 7 # or * # 0 2 4 6 #
Battery status : * # 9 9 9 8 * 2 2 8 #
Change sound of alarm : *#9998*289#
Vibra test : *#9998*842#
SIEMENS
S6, S8:
If you add to phonebook under ‘own phone number’ +12022243121 with namez (for example MMI), then you will see something
S10, E10:
In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.
S15e:
Monitor Mode :
Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800
S25:
Enhanced Full Rate
turns on : *#3370#
turns off : #3370#
Haft Rate Mode :
*#4720# turns on
#4720# turns off.
Languages :
*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish
How to change PIN2 ?
**04*old PIN2*new PIN2*new PIN2#
What is my software version?
Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.
How to extend battery life:
IrDA - turn on only when you need.
Turn off automatic network search (6-3) Turn off Vibration alarm.
C25:
Languages :
*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish
How to change PIN :
**04*old PIN*new PIN*new PIN#
Cara Mengecek Status SIMLOCK
Tekan *#0606# and then press left soft-key, you will see strange characters, then text (”brak blokad”).
If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clickin on left key (you will see IMEI and software version).
Alcatel
Numer IMEI: * # 0 6 #
Wersja oprogramowania: * # 0 6 #
Net Monitor : 0 0 0 0 0 0 *
Alcatel One Touch Easy Secrets Codes :
Press : *#06# to view IMEI number
Press : *#000000# to enter Service Menu
To view Secret Menu type 000000 then press *
Bosch
Numer IMEI : * # 0 6 #
Ustawienia poczatkowe : * # 0 0 0 0 #
Net Monitor : * # 3 2 6 2 2 5 5 * 8 3 7 8 #
Reset telefonu : # 3 3 7 0#
Bosch 738 and Bosch 718, Bosch COM 607 and 908 Secrets Codes :
To display the IMEI *#06#
To set the language automaticaly (To english) : *#0000#
To set the Enhaced Full Rate : *#3370#
To Reset the phone : #3370#
To enter sim lock code : *#9000#
To enter the network code : *#9003#
To enter the subset code : *#9004#
To remove the sim lock permanently : *#9100#
To remove the corporate lock permanently : *#9101#
To remove the provider lock permanently : *#9102#
To remove the network lock permanently : *#9103#
To remove the subset lock permanently : *#9104#
Reveal Engineering Menu Press : *#3262255*8378# (equivalent to *#DANCALL*TEST#) to make secret Engineering
Dancall
Numer IMEI : * # 0 6 #
Wersja oprogram owania : * # 9 9 9 9 #
Ericsson 6xx/7xx/8xx
Numer IMEI : * # 0 6 #
Wersja oprogramowania : > * < < * < *
NOKIA 3110
Numer IMEI : * # 0 6 #
Wersja oprogramowania : * # 0 0 0 0 # lub *#9999#
Przywraca ustawienia fabryczne: *#7780#
Info o simlocku (specjalne menu) : * # 9 2 7 0 2 6 8 9 # (*#war0anty# )
lub *#3110#
Zatrzymanie zegara karty SIM *#746025625#
Philips
Numer IMEI: * # 0 6 #
Info o simlock`u: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) albo * # 7 4 8 9 #
Philips DIGA phones:
Blocking list *#3333*#
Time connected *#2558*#
Flags,something *#3377*#
Security code *#7489*#
Philips FIZZ phones:
IMEI code *#06#
SW info *#8377*#
Security code *#1234*#
Philips SPARK phones:
IMEI: *#06#
Philips GENIE phones:
IMEI number : *#06#
Status register: C, BS, RR, MMI, CREAT : *#2254*#
Activate and deactivate the “DEBUG CALL”-Mode; when activated, make a
Call to a busy line an the phone will display some hex-codes on the display : *#2255*#
The time in days,hours and minutes you are connected to the net : *#2558*#
Not clear; the phone reconnects to the net : *#2562*#
Not clear; warmstart : *#2565*#
(NO) BLOCKING - list (15 items) : *#3333*#
Not clear, the phone waits a random time and reconnects to the net : *#2377*# “BEER”:
Init, Flags, SIM LCK : *#3377*#
Resets the (NO) BLOCKING - list : *#3353*#
Name, Length, SIM phase : *#7378*#
SECURITY CODE : *#7489*#
Activate and deactivate the SLEEP MODE (when deactivated the battery will go down!)*#7693*#
SPURIOUS INTERRUPT : *#7787*#
SWITCH OFF : *#7948*#
Some information about the SLEEP MODE: Wake, Sleep Req., Sleep : *#8463*#
SAMSUNG SGH-600 SECRET CODES
Show IMEI : *#06#
Show Software Version : *#9999#
Show Serial Parameters : *#0001#
Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI torestore it ) : *2767*3855#
Custom EEEPROM Reset : *2767*2878#
Battery status (capacity, voltage, temperature) : *#9998*228# ->
Program status : *#9998*246#
Change Alarm Buzzer Frequency : *#9998*289#
Debug screens : *#9998*324#
Watchdog : *#9998*364#
EEPROM Error Stack : *#9998*377#
Trace Watchdog : *#9998*427#
Change LCD contrast : *#9998*523#
Jig detect : *#9998*544#
Memory status : *#9998*636#
SIM File Size : *#9998*746#
SIM Service Table : *#9998*778#
RTK (Run Time Kernel) errors : *#9998*785#
Run, Last UP, Last DOWN : *#9998*786#
Software Version : *#9998*837#
Test Vibrator : *#9998*842#
Vocoder Reg : *#9998*862#
Diag : *#9998*872#
Reset On Fatal Error : *#9998*947#
Last / Chk : *#9998*999#
Yann debug screen (=Debug Screens?) : *#9998*9266#
Software version : *#9998*9999#
Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete) : *0001*s*f*t#
Unknown : *0002*?#
Unknown : *0003*?#
All CDMA codes
SAMSUNG
Samsung sph-n240, n400, a460, a500, etc Nam Programming :
Nam Set : ##Spc
Test Mode : 47*869#1235
Debug Menu : ##33284,ok
Service Menu : Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc) : ##786, ok
A-key : ##2539, ok
Label Selection : ##3882,ok
Label (Home, Work, etc) : **523, ok
NGG Setting (Gateway, etc.) : ##2769737, ok
Vocoder : ##8626337, ok
CAI Change : ##7738,ok
Enable TTY : ##889, ok
Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :
Nam Set : 47*869#08#9
Nam Set : Menu+60
Test Mode : *759#813580
Test Mode : 5809540*45680
A-key : Menu+0, 25##
External Audio : Menu+0, ####
Debug Menu : Menu+8, 0415 or Spc
Debug Menu : Menu+9, 0415 or Spc
Brief NAM Programing : Menu+40,626 (not all version)
LCD Contrast : Menu+45 (not all version)
SIO Mode : Menu+49
SIO Mode : Menu+69
Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming :
Nam Set : Menu, 6, *
Service Menu : Menu, 9, *
Test Mode : 47*68#13580
Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming :
Nam Set : 6548#0**4#6
Nam Set : 47*869#08#9
Nam Set : 74153697193
Test Mode : 5809540*45680 (88 - efs clear)
Debug Menu : Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415
Debug Menu : Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415
Samsung N356 (India version) Nam Programming:
Test Mode : Menu, 5, down arrow, *
Test Mode : **00## (in some flashes)
Samsung i700, etc Nam Programming:
Nam Set: Go to start and select “PHONE” from the drop down menu, dial #83587
Samsung i300, etc Nam Programming:
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
TEST MODE COMMANDS:
n105_test_mode.txt
a500_test_mode.txt
a530_test_mode.txt
<
Qualcomm qcp-800 Nam Pogramming:
Nam Set : Menu+3+0+Spc
Field Test : Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:
Nam Set : 111111+Jog Dial(Ok), Select “Programming”+Spc
CAI Change : ##7738,ok
Enable TTY : ##889,ok
Life Timer, PRL, etc : ##786,ok
A-key : ##2539,ok
A-key : 2539,ok
Tips:
On some kyocera handsets the factory service module has not been disabled and the phone can be programmed without the spc by inputting.
Nam Set : ##333333 menu (service)
<
Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:
Nam Set : ##Spc+Ok+Key Down+Ok
Advanced Setup : ##3282+Ok+Key Down+Ok+Msl
A-key : ##2539+Ok+Key Down+Ok
Version : ##**837+Ok+Key Down+Ok
Debug Menu : ##FSC+Ok+Key Down+Ok
Airtime menu : ##8463+Ok+Key Down+Ok
Change CAI : ##7738+Ok+Key Down+Ok
Vocoder : ##8626337+Ok+Key Down+Ok
Reverse Logistic : ##786+Ok+Key Down+Ok
Set IP Address : ##2769737+Ok+Key Down+Ok
TTY On/Off : ##889+Ok+Key Down+Ok
Ready Link : ##4636+Ok+Key Down+Ok
Browser Init On/Off : ##4682+Ok+Key Down+Ok
Picture Token : ##25327+Ok+Key Down+Ok
Unknown Code : ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)
Sanyo scp-A011, smp-A017, etc Nam Programming :
Nam Set : F9(3 beep) + 0*72696#767
<
Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:
Nam Set : *3001#12345#
Software Version : *#837#
Software Version : *#9999#
Esn Number : *#92772689#
Restart Phone : *#75681#
Restart Phone : *#75682#
Nokia 8887 Nam Programming:
Nam Set : *3001#12345#
Version : *#0000#
Evrc : *#8378#
Esn/Data/Timer : *#92772689#
SID : *#743#
Nokia 8587 Nam Programming:
Nam Set : *#626#7764726#
A-Key : #8159357022#4579# (26 digits)
A-Key : #8159357022#4547# (20 digits)
Version : *#0000#
Version : *#837#
Vocoder : *#3872#
Change language : Menu 5, 3, 1
Change DM mode : *#7678#
Debug Screen : *#8378#
Debug : *#8380#
Field Test Menu : *#83788#
SPC Unlock, Factory Reset:
Full Factory Reset : *#7370#
Resets all settings including non-user changeable items (like SPC)
NOKIA TEST MODE:
NOKIA 51xx, 61xx, 71xx, 3285, 63xx, etc:
1) Turn on the phone . Press *3001#12345#
2) Scroll up to where it says “Field Test” and choose SELECT
3) Highlight “Enable” and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to “Field Test” choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
“Field Test” choose SELECT. Press 0 0 and then choose OK.
NOKIA 3360, 6360:
1) Turn on the phone . Press *3001#12345#
2) Scroll up to where it says “Field Test” and choose SELECT
3) Highlight “Enable” and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to “Field Test” choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
“Field Test” choose SELECT. Press 2 1 0 0 and then choose OK.
<
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:
(Power the phone on and wait until the little light on top goes out)
Nam Set : 289+fcn+#+1
Service menu : fcn+00+fsc(000000)
Test Mode : Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl Nam Programming:
Nam Set : ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc
Audiovox 8610, 8910, etc Nam programming:
Name Set: ##847446, end, 111111
Audiovox-107 Nam Programming:
Nam Set: 45680*47*869#1
Audiovox CMP-3 Nam Programming:
Nam Set: 45680*47*869#1
Dm Mode: Menu, 6, 6
Audiovox 9950 Nam Programming:
Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming:
Nam Set: m + # + envelope key + * + 1
Audiovox Thera (Toshiba 2032) Nam Programming:
Thera Nam Programming User Manual - nam_thera.pdf
AUDIOVOX TEST MODE:
Audiovox 9100, 9155 :
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
“FSC Code”, press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.
<
Motorola 7760, 7860, 2260, 8160, etc Nam Programming:
Nam Set: Fcn,0000000000000, Rcl
Nam Set: 74663#, Fcn, Fcn
Test Mode: Fcn, 00**83786633, Sto
Motorola v60c, v120c etc Nam Programming:
Nam Set: 74663#, Menu, Menu, Spc
Nam Set: Menu, 073887, * (type quickly)
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to “PrefMod”
4) RIGHT Softkey (Change) until you see “DigOnly”
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)
Motorola t182, c210, etc Nam Programming:
Nam Set: ##1111 end
Nam Set: ##298645665 end
Short Nam: ##073887 sto
Motorola v710, v730, v740, ms150, etc Nam Programming:
Nam Set: 8378*# + press 3 times NATE (spc - 071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#
Motorola StarTac 2004 Nam Programming:
Nam Set: 5759789*#, rec key (3)times (spc - 915037)
Motorola ms200, ms230, etc Nam Programming:
Nam Set: 5759789*# (spc - 915037)
Motorola v6060 Nam Programming:
Nam Set:147*369#456*0#
MOTOROLA TEST MODE:
v60, c120, c331, etc:
1) Turn on the phone. Press MENU 0 7 3 8 8 7 *
2) The phone will require you to “Enter a Security Code”, press 000000, OK
3) Scroll down to “Test mode” choose SELECT. Scroll down to “Enable”
choose SELECT. Your phone is now in test mode.
4) Signal strength is the 3_rd number down on the left hand side of the screen.
5) To toggle between regular mode and test mode: Press MODE then
quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
6) To turn off the test mode the phone must be in regular mode, then follow
the above sequence and scroll down to where it says “DISABLE” instead of
“ENABLE” and choose select.
Motorola Bible - bible.txt
<
lgc-300, etc Nam Programming:
Nam Set: Menu, 9, Spc
A-key: Press “Sto” 3sec, 2539**
lgc-330w, etc Nam Programming:
Nam Set: Menu, 4, 0, Spc
A-key: 2539**
